6998 Harding Hwy
PO BOX 526
Mizpah, NJ 08342
609-476-2181
JC&A Thanks Josh Hernandez, Kyler Campsmith, Alex and Nick Ruga for submitting all photos used in the website!
Projects We Have Done!
"We are not perfect, but we Strive for Perfection"
Jim Ruga, President of JC&A
Client Name, Location, and Description of completed projects.
Double Waler Install date N/A
Client: N/A
Location: N/A
Description: Double Walers are installed when sheets are not able to get enough toe in the ground and are unstable. A second bottom whaler is installed to stabilize the bottom of the sheet wall.
Website: N/A
Bank Stabilization 2024
Client: Speedwell Construction
Location: Wayne, PA
Description: Sheet piling holds back sloped bank from caving in allowing further excavation to be done.
Sheet Pile Bridging 2024
Client: Liberty Auto & Electric
Location: New Haven, CT
Description: Full tank sheet piling install. Sheet Pile bridge constructed for removal.
Tank Hole Preparation 2024
Client: Boulder Petroleum
Location: Mill Town, NJ
Description: Stoned bottom of hole for tank setting. Would Eventually assist with setting tanks and backfilling.
Tie Backs Install date N/A
Client: Pine Run
Location: N/A
Description: Tie backs are installed on long walls, 60+ feet that require extra support to prevent cave ins/collapses.
Cofferdams Installations date?
Client: N/A
Location: N/A
Description: Cofferdams are installed to allow safe working areas directly up to a body of water.
Website: N/A
Click on Examples with explanations below
Bracing the bottom of sheets that have little toe into the ground do to compacted soils or rock.
Preconstructed retaining wall behind sheet wall is protected during tank install from collapse.
Precast retaining wall installed after the sheet pile was installed for protection.
An exterior cable is connected to the Upper waler and tied back to an anchored beam to support long wall stretches.
